If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
it's usually on the outside so that the hinged barrel won't be in the way, and interrupt the lid/door to close flush. also if you install it inside, the lid/box sides will be in the way of the opening.
Thanks all. It's being used on a medicine cabinet and perfectly flush door/case is not that critical. I have to install magnetic catches and handle so there will be a gap on the side opposite the hinge. I mounted on the faces since it helped cover some poor grain and a mistake (no!!...not a mistake!!!) I made.