Announcement

Collapse
No announcement yet.

Joing boards togethir

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Joing boards togethir

    I am making a night side table where I have to biscuit join some boards together. Do I join them first and them put them through the planer, or put them through the planer and then join them.
    TKS Reboot

  • #2
    You can do it either way.
    ================================================== ====
    ~~Don't worry about old age; it doesn't last that long.

    Comment


    • #3
      Tks BadgerDave, appreciate the info.

      Comment


      • #4
        As long as the final width will fit the planer I would do it last so that it's perfectly flat. Your biscuit jointer should be accurate enough, though. Also, remember to leave the boards a little long in case you get snip from the planer.
        Later,
        Chiz
        https://www.ridgidforum.com/core/ima...lies/frown.pnghttps://www.ridgidforum.com/core/ima...es/redface.pnghttps://www.ridgidforum.com/core/ima...s/rolleyes.pnghttps://www.ridgidforum.com/core/ima...lies/smile.png

        Comment

        Working...
        X