Announcement

Announcement Module
Collapse
No announcement yet.

R4511 extension table leveling

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • R4511 extension table leveling

    I have one place on the left extension table that wants to rock a little on me no matter how I adjust the other 3 setscrews on that wing. It's where the ext. table goes up against the main table. Since the extension tables slide in on the support bars I can't figure any way to shim it-but I can probably hold it down flush with the main table while I tighten the nut on the threaded stud adjacent to this area of the ext. table.

    Anything wrong with this plan, or does anyone have a different suggestion?

    Thanks,

    Ed

  • #2
    Re: R4511 extension table leveling

    I had the same exact problem on the left side. Had to just keep playing with while I tightened the wing. Eventually, I got it where I wanted it with no problems.

    Comment


    • #3
      Re: R4511 extension table leveling

      Originally posted by nordichomey View Post
      I had the same exact problem on the left side. Had to just keep playing with while I tightened the wing. Eventually, I got it where I wanted it with no problems.
      Well that's pretty much what I just did.

      Hopefully the 3 studs and nuts per side will hold it.

      Comment

      Working...
      X