Announcement

Collapse
No announcement yet.

ridgid tp1300 planer

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • wine maker
    started a topic ridgid tp1300 planer

    ridgid tp1300 planer

    I have a question about the dust collection system? I bought the dust collector but it doesn't work very good. Does the #38 "plate dust chute" need to be removed when using the dust collection system? Any help will be appreciated.

  • wine maker
    replied
    Dave,

    Thanks for your reply.

    Leave a comment:


  • Cutbuff
    replied
    No, that plate stays in place, and you simply tighten the attachment with the 3 red knobs. If you are using a shop-vac with the 2 1/2" connection you'll be lucky to get 50% of the chips. The shop-vac and 2 1/2" size hose cannot keep up with the planer output.

    I've now got mine connected directly to one of the two 4" inputs on my DC via a 10' hose. Collects everything that the planer puts out.

    Incidentally, I thought that the dust chute together with the Her-cu-lift were included in the base price of $379. They were with mine.

    David

    [ 03-17-2003, 08:08 PM: Message edited by: Cutbuff ]

    Leave a comment:

Working...
X