Announcement Announcement Module
Collapse
No announcement yet.
TS2424 ... video included? Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • TS2424 ... video included?

    Does anyone know if the 2424 includes a video to walk a new user through the initial setup? There are a lot of intricate parts in this TS!!!

  • #2
    Jamie,
    The answer to your question is yes the TS2424LS comes with a very nice detailed video on how to assemble and adjust the saw properly. If your saw didn't include it I would check with the fine folks at Ridgid before putting the saw together to see if they would send you a copy. I watched my tape first and feel that it made the book read much easier... Good Luck. [img]smile.gif[/img]
    Regards,<br /><br />Big Johnson<br /><br />Pictures: <a href=\"http://www.woodworkersweb.com/modules.php?set_albumName=albuv85&op=modload&name= gallery&file=index&include=view_album.php\" target=\"_blank\">http://www.woodworkersweb.com/modules.php?set_albumName=albuv85&op=modload&name= gallery&file=index&include=view_album.php</a>

    Comment


    • #3
      Big Johnson,

      Thanks for the help. I contacted Ridgid this morning and they are sending a video. They said it should have been included and was left out by mistake.

      Regards,
      Jamie

      Comment


      • #4
        I bought a TS2424 about three weeks ago and it also came without a video. To Ridgid's credit, the printed instructions were easy to follow and I had no problem assembling the saw in about two hours.
        -kbarber
        \"I have not failed. I\'ve just found 10,000 ways that won\'t work.\"<br />-Thomas Alva Edison

        Comment


        • #5
          kbarber1,
          WOW... 2 hours is fast. I think I ended up somewhere around 4-1/2 to 5 hours when I put my saw together. I think I might get a bit technical when I do things thou. I spent a fair amount of time checking blade trueness, fence to blade alignment and many other things. I feel it is about as close as it can possibly be. I am a design engineer by trade so maybe that’s why I am this way. Anyhoo, glad it worked out for all. I need to find some videos to watch in the evening on wood working in general. I have worked with steel my whole life. I started out as a certified welder and went back to school for drafting and engineering so woodworking is new to me. I don’t quite understand the lingo yet but I’m catching on…
          I love this Ridgid website… [img]smile.gif[/img]
          Regards,<br /><br />Big Johnson<br /><br />Pictures: <a href=\"http://www.woodworkersweb.com/modules.php?set_albumName=albuv85&op=modload&name= gallery&file=index&include=view_album.php\" target=\"_blank\">http://www.woodworkersweb.com/modules.php?set_albumName=albuv85&op=modload&name= gallery&file=index&include=view_album.php</a>

          Comment


          • #6
            Hey Big Johnson,
            I'm a systems engineer supporting scheduler software for Unix and NT. I am also new to woodworking after taking woodshop, metalshop and drafting in HS years ago. Thought I would become an architect but changed my mind. Now I can't wait to start designing and building my own furniture. 2 hours was the assembly time not including the time spent unpacking and reading the manual. I had to do very little tweaking to get the saw properly set up.
            -kbarber
            \"I have not failed. I\'ve just found 10,000 ways that won\'t work.\"<br />-Thomas Alva Edison

            Comment

            Working...
            X