Announcement Announcement Module
Collapse
No announcement yet.
Align R4510 Tabletop to Blade Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Align R4510 Tabletop to Blade

    Hi,

    I would like to align the saw's tabletop to the blade as it is off by approx 1/32" from the front of the blade to the back.

    I see the four hex-key bolts on the top and I tried to loosen them. They are very tight and I was afraid I would damage the bolts if I applied too much force.

    Has anyone tried to make this adjustment?

    Thanks,
    Duncan
Working...
X