Announcement

Announcement Module
Collapse
No announcement yet.

dado using sled

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • dado using sled

    i have to cut a series of dados across a board, about an inch apart. is it safe to pull back the sled after each cut (with the saw running) rather than stopping the saw and waiting for the blades to stop, then lifting the sled back?

  • #2
    I've never used a sled, Lym, but have cut a lot a lot of dados and always pull the workpiece back across the blade. Don't rush it and keep the workpiece firm (no white knuckles and bulging eyes necessary).
    Later,
    Chiz
    Later,
    Chiz

    Comment

    Working...
    X