Announcement

Announcement Module
Collapse
No announcement yet.

table saw

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • table saw

    What do I need to put on the top of my table
    to keep it from rusting.

  • #2
    Paste Wax---with no silica in it---best and most often recommended product---also keeps things (like miter gauges) running smoooooth!

    Dave

    Comment


    • #3
      "with no silica in it"
      strike word "silica", insert "silicone" in it's place.

      Dave

      Comment


      • #4
        Although, I don't think you want sand in the wax either....

        Comment


        • #5
          That's right; buffing is sufficient.

          (Ancient Chinese Proverb: Wisecracks beget wisecracks.)

          Comment


          • #6
            Now would be a really good time to tell a long story about the wonderful results I get by sanding and waxing all at the same time......

            Dave

            Comment

            Working...
            X