Announcement Announcement Module
Collapse
No announcement yet.
Mounting new rip fence. Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Mounting new rip fence.

    I put on an HTC 50" rail fence on my TS2412. Some might compare that to putting a nitrous kit on a Pinto. But as a heads up the alignment holes are right on when attaching the brackets to the top of the cast iron. Dead on cuts with NO deflection and an absolutely straight rip fence.

  • #2
    I'm sorry, what is HTC?

    Comment


    • #3
      It is a very solid Biesemeyer clone. The 7 foot rails support themselves but to keep the saw from tipping over you need a leg kit. Here is a link: http://shop.woodcraft.com/Woodcraft/...B6AB8D9265F5C1

      That link should work or go to www.woodcraft.com and search for HTC FENCE. HTC makes portable bases for power tools and this fence is a new entry for them.

      Comment


      • #4
        Thanks! Looks great!

        Comment

        Working...
        X