Announcement Announcement Module
Collapse
No announcement yet.
WL1200 Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • WL1200

    Jake,

    I know the spindle is a 3/4" 16 TPI, is it right or left hand thread?
    Buying a 3 jaw chuck and specs on the WL1200 don't say.
    Thanks
    Jay

  • #2
    If it is not right-hand thread, it will automatically loosen. Left-hand threads are used on outboard attachments. Caveat, I have no specific knowledge of that particular machine, but assume it follows the same laws of mechanics as others.

    Dave

    Comment


    • #3
      The threads on the spindle of the WL1200 are right hand thread.

      Jake

      [ 09-03-2002, 09:43 AM: Message edited by: JSchnarre ]

      Comment

      Working...
      X