If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You will be required to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
MAINTENANCE NOTICE: The site will be down for maintenance on Sunday, 29 November 2015, between 12PM (noon) and 4PM Eastern. We apologize for any inconvenience!
I just purchased the riser block for my BS1400 and I was wondering about the blade for it.The box says it requires a 105 1/2 blade but I can't seem to find that size.Can I use a 105" size??. I want the 3/4" with a 3 tpi for re-sawing.
There is alot of good blades out there, and expensive ones. I take advantage of Grizzlys discount for quantity purchases. I find their blades adiquate for everything I do with my band saw with a riser block, and they don't break your bank. I've yet to break one. I have the 6 tpi 3/4" blade. But I haven't tried resawing anything over 6 1/2" yet in the hardwood class.
John E. Adams<br /><a href=\"http://www.woodys-workshop.com\" target=\"_blank\">www.woodys-workshop.com</a>