Update for those interested.
Saw came early so I went to pick it up wednesday. 5 boxes packed up nicely on a palate with celephane wrapping all boxes together on palate. Shop I bought from spent about 45 minutes giving me info about PM and setting up saw.
All parts were there, everything packaged nicely . Parts all labeled, instructions good but average person will probably have a question or 2 during assembly. Workable but I had to call Powermatic 3 times with little questions about aligning pulleys, wings etc. They answered and I was not on hold longer than a minute or 2 to get an engineer. I scratched a bit of paint while assembling legstand and they are sending out touch up paint FREE!!!.
Almost Finished setting up except front rail was slightly warped. I phoned them up and are sending out via UPS ro Fed Ex, can't remember which one ( no questions asked or rails returned or any kindof hassles ). Will be here 5 - 7 days. Cast iron tabletop and wings are flat flat flat. I can't even see a speck of light under my straight edge. It's shiny like a mirror. Can't see any visible machining marks on the top or wings.
Have to wait another week til I can play with my toy, but I'm happy b/c company is so nice and helpful through the assembly process.
I'll keep ya posted & get a picture if I can get my hands on a digital camera and figure it out.
sidenote. Motor is twice of size of the saw I'm replacing.
MORE POWER arrghh arrgghh arrgghhh arrgghh