Re: R4330 setup tips
Spend the time to set the tables up properly. On page 16 of the online manual, it gives the instructions on how to set the infeed and outfeed tables. You really have to get them set level with the planer to eliminate snipe. I have a long-ish level that I place across the entire thing, under the cutter head and sticking out both sides. I'm just looking at the bottom of the level to make sure the tables are flat to the planer. Unplug the planer and set the cutterhead as far up as possible to do this.
I put it all back together better than before. There\'s lots of leftover parts.