I would of brought the scissor lift and won, plain and simple! :thud:
What size spiral root saw do you have and which one gets the most use?
The Ridgid T-111 root saw is my number one cutter blade!
Well I got a call today to clean a main line and I got clean from the 3" main vent on the roof ! This is a first time for me with the k 60 ! I broke out the 32' extension ladder but found I was able to get up on the roof with my little six foot a frame ladder. Have any of you that clean from the roof had any issues with vent flashing coming loose and if so how much do you get into the repair of flashing ? Not a bad job though took me two hours ran the 7/8" cable out 75' two times and one last time 105' and picked up $245.00 !!
The T 110 is the the cutter I was sold as a spiral root saw . Now this cutter is I believe only 2-1/2" and many times very hard to even get in to a line I worries it is too small for 4" to 6" mains is the T 111 what you use ?
a root say is my cutter of choice on roots. but i also use my custom 3'' x 4'' pear shape cutters and full 4'' if they will get out all the way.
i use root saws that i've enlarged and custom grind.
So you don't the t 110 & 111 ?
i have, but they are only 3/4'' stock. i use a heavier 1'' stock blade with more of an open offset hook. this allows me to grab roots in the reverse direction and the 1'' stock allows for more strength, more grinding and more strength to open up the cutter.