Well, I can't get my miter slots aligned with the saw blade. Closest I can get it .004 thou. My 45deg. difference is about .008thou. I'm at the limit of my saws cabinet holes and they won't go any farther in the direction I need it to. I've searched the forum for answers and found a few with this problem but no easy solutions. Anyone have anything other than removing the top and enlarging the holes? These cabinet holes have a large bushing type insert around them and enlarging them would be no easy task. I wonder if the trunions have enough slop in them to give me enough clearance? Any suggestions would be appreciated. I'm not going to try and exchange the saw. Thanks in advance. Don Jr.