I finally got my Tric Tools Pipe Burster yay! It is a 30 ton 4" to 6" system. With additional cables and heads to do water mains as well. It is a refurb from Tric Tools. It came with the red hydraulic unit on the motorcycle lift that can do 10k psi but low GPM. These are different then a lot of systems as they are high psi capable, though most bursting is done at around 2000 psi. The stanley hydraulic unit is one I use to run my hydraulic pumps, cement saws and Jackhammers. It is only 2200 psi but 8 gpm. So I will use it to do the pulls because it will be faster and if I get into anything that needs more psi I will switch to the Tric hydraulic unit. Now if this year rolls my way I can get a Pipe Liner from LMK and I will be set!