303 results in 0.0187 seconds.
-
I had an older Fein up until a few years ago until I burned out the drive system. I tried several different manufacturers until I settled on the Rockwell.... -
Thematically controlled heat tape?Leave a comment:
-
Once you get all the PEX installed, secure with a tie wrap. Cheap, easy and if you need to add more just cut the tie wrap. Run the colds on 1 J-hook and...Leave a comment:
-
It sharpens both carpenter and regular round pencils....Leave a comment:
-
...Leave a comment:
-
Use a single pole 20 amp and a filler plate.
?? a 8/2 cable should have a black and white conductor not black and red. Are...Leave a comment:
-
Weak thermocouple, replace it.Leave a comment:
-
Leave a comment:
-
Those readings are correct....Leave a comment:
-
Yes it should have but it is common for it not to be marked. The poster should mark it with a bit of black tape....Leave a comment:
-
Nut 1 is the constant hot with the white wire feeding the switch
Nut 2 is the neutrals
Nut 3 is the switched hot coming from the switch...Leave a comment:
-
A circuit breaker will carry 100% of its rating forever. Even if it is subject to a small overload, say 5-10% it will carry the load for a while before...Leave a comment:
-
Leave a comment:
-
Do you remember which cable (black white pair) had the white connected to the 3 blacks and the loose black wire? If you do, connect that black to the...Leave a comment:
-
I find it helps to add marbles to the can to keep it full. Less air in the head space slows down the drying out process. That said, buy small cans and...Leave a comment:
Leave a comment: