2430 results in 0.2125 seconds.
-
Was a good read until the part about no gloves -
Dan the septic spammer strikes againLeave a comment:
-
If you really want a good deep unit go to https://prototek.net/
Also try hooking your transmitter to the monitor ground lug to energize the seesnake...Leave a comment:
-
I think if you look well you should be able to pay $700 to $1200 for a Model ML+ (the plus vivax model has a new 3rd antenna ring in the middle) it is...Leave a comment:
-
It won't work right because that is 35k line freq. best to just get a cheap ML2 Vivax on ebay most people dont use marker balls so they go cheap.Leave a comment:
-
Forget about peaks and nulls because the ridgid locators use omni directional antennas , so that you can approach from any angle to the sonde. At first...Leave a comment:
-
Look on ebay for a vivax 10 watt usually $400-$500 does every freq you need as the seektechs are programmable anyway. Then you will use 8khz 32khz, 200khz...Leave a comment:
-
Do you have the transmitter? It makes it a more accurate locate if you do but if not and just want the sr20 to work on it's own is there any reason you...Leave a comment:
-
Main thing is to keep the rear lid clean (after dumping before driving off) and snug (do not overtighten) and keep an extra seal for the door also because...Leave a comment:
-
I would try going into HQ on your PC and making a update USB drive with the latest firmware, even if you have the latest firmware start an update as this...Leave a comment:
-
My favorite All Clear vs. the K60 post was not a picture but just a description, In my mind All Clear had K-60's in the shop as tire chaulks and as Jack...Leave a comment:
-
Wow a blast from the past: I remember when All Clear bought that pressure washer and went back and forth with Rick about it LMAOLeave a comment:
-
CT400 is a tank have never needed anything for it, call ridgid and ask if parts are still being made and stocked.Leave a comment:
-
You have to have a completed circuit, as a test run the snake cable out on the ground do not have the snake plugged in, connect either lead from the 510...Leave a comment:
-
Have you tried another SD card? That would be first 2nd would be to load the first sd card to a pc then format it.Leave a comment:
Leave a comment: